LTS-ICP6800 Inductively Coupled Plasma Emission Spectrometer Standard

Inductively Coupled Plasma Emission Spectrometer (ICP) is the main light source used in automatic emission spectroscopy. ICP has the characteristics of ring structure, high electron density and inert atmosphere. It can be used as an excitation source with low detection limit, wide linear range, less ionization and chemical interference and high accuracy and precision.

Category:

Products

ICP

Spectrophotometer

WhatsApp：

8615666779750

Message

Inductively Coupled Plasma Emission Spectrometer Standard

Specification

Model	LTS-ICP6800
RFPower technical parameter
Circuit type:	solid-state RF power supply,with function of automatch
Frequency:	27.12MHz±0.05%
Frequency Stability:	<0.1%
Power Output:	800W—1200W
Power Output Stability:	<0.3%
Escaped RF radiation:	30cm away from the instrument, electric field: E<2V/m
Sampling System Technical Parameter
Output working coil inner diameter:	25mm
Torque tube:	Three concentric, external diameter 20mm
Coaxial nebulizer:	Outer diameter 6mm
Double barrel atomizing chamber:	Outer diameter 34mm
Gas Flow Controls
Plasma Argon Flowmeter:	(100-1000)L/h(1.6-16L/min)
Auxiliary Argon Flowmeter:	(10-100)L/h(0.16-1.66L/min)
Carrier Argon Flowmeter:	(10-100)L/h(0.16-1.66L/min)
Pressure Maintaining Valve	(0-0.4MPa)
Cooling Water:	Temperature:20-25℃,Rate of Flow>5L/min, Hydraulic Pressure>0.1MPa
Spectrometer
Optics:	Czerny-Turner type
Focal length:	1000 mm
Grating:	lon Beam Etching Holographic Grating,3600L/mm or 2400L/mm
Reciprocal linear dispersion:	0.26nm/mm
Resolution:	≤0.007nm(3600 line grating); ≤0.015nm (2400line grating)
Wavelength range:	3600 line grating:(190nm~500) nm; 2400 line grating: (190nm~800) nm
Minimum pace of stepping motor:	≤0.0006 nm
Exit Slit:	12um;Entrance Slit:10um
Photoelectric Converter Performance
Photomultiplier tube specification:	R293/R928
Negative HV on PMT:	0-1000V; Stability:<0.05%